New lower prices on www.toquesnuff.com

Homepage › Forums › General Discussions › Toque bullets

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • 19 June 2022 at 11:28 pm #15278
    JetfixerJason
    Participant

    Are these gone forever?

    I had a bunch, but I’ve broken one and lost 2 (there’s a 747 flying around the world with one somewhere in the lower cargo floor, I’ll be damned if I know where it landed), and a couple are in pretty sorry shape.

     

    Just wondering

    25 June 2022 at 11:30 pm #15296
    rdr
    Participant

    I just got one in an order placed a month ago. I know you can find unfilled bullets on sites like AliExpress (direct from China) or even Amazon (might be faster shipping but cost more).

     

    I only got the one and it’s useful but it was packed pretty tightly.  Had to take some out and stir before it worked well enough for my purpose. Might just be the type, since the other toast type I have doesn’t really announce itself.

    19 July 2022 at 4:06 pm #15357
    JetfixerJason
    Participant

    OK mothersnuffers (I stole that from TVc15 BOOM, it’s mine)

    I ordered these from aliexpress, and I want to say they’re great.  The bowl isn’t big, but if you tap it when you load it, the chamber underneath the bowl fills so you get a bigger hit than with the Toque plastic ones.  Probably almost twice as much.  The air hole is a lot bigger too so it hits like a champ.  Sorry Roderick, but these work way better.
    I’m going to leave one at work, I wouldn’t want to travel with it unless you want your bag torn apart and to have to explain it every time you go through a metal detector.
    If you like bullets, I would say get a few of these for sure.

     

    19 July 2022 at 8:10 pm #15358
    Roderick
    Keymaster

    Jetfixer, you are quite right.  We used to sell them years ago, just never reordered as they were rather slow, but they were good.  However, we discovered that working on the plastic bullets, if you took a really sharp knife you could make the chamber bigger and the exit hole slightly larger and this made such a huge difference.

    19 July 2022 at 8:10 pm #15360
    Roderick
    Keymaster

    Jetfixer, you are quite right.  We used to sell them years ago, just never reordered as they were rather slow, but they were good.  However, we discovered that working on the plastic bullets, if you took a really sharp knife you could make the chamber bigger and the exit hole slightly larger and this made such a huge difference.

    19 July 2022 at 8:10 pm #15362
    Roderick
    Keymaster

    Jetfixer, you are quite right.  We used to sell them years ago, just never reordered as they were rather slow, but they were good.  However, we discovered that working on the plastic bullets, if you took a really sharp knife you could make the chamber bigger and the exit hole slightly larger and this made such a huge difference.

    21 July 2022 at 9:14 am #15367
    Anonymous

    Yeah, your right, I always use a tiny drill bit. Works Great!

    21 July 2022 at 7:21 pm #15378
    JetfixerJason
    Participant

    I used an x-acto knife on mine, but I never made the hole bigger.  I guess I should have.

    17 August 2022 at 10:24 pm #15493
    rdr
    Participant

    I got detained when I told them i had bullets in my bag I guess I should have specified…

    10 March 2024 at 12:20 am #21542
    Huffen’Snuff
    Participant

    Thanks for the cylinder bore tip, I got menthol Toque plasti bullet in my order.

    24 October 2024 at 11:28 pm #26653
    SuperSnuff
    Participant

    Bullets are trash.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.